[PATCH v2] dt-bindings: aspeed-lpc: Make parameter optional
From: Vijay Khemka <hidden>
Date: 2019-01-18 20:16:26
Also in:
linux-arm-kernel, linux-devicetree, lkml, openbmc
Subsystem:
multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Memory-region and flash phandle is not a required parameter, it is optional to describe in device tree and needed only use basis. Signed-off-by: Vijay Khemka <redacted> --- Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index 34dd89087cff..d28c4e117611 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt@@ -135,6 +135,9 @@ Required properties: - clocks: contains a phandle to the syscon node describing the clocks. There should then be one cell representing the clock to use +Optional properties: +These below properties are optional to define. + - memory-region: A phandle to a reserved_memory region to be used for the LPC to AHB mapping
--
2.17.1