Re: Regarding usb dwc3 core shutdown callback
From: Sandeep Maheswaram <hidden>
Date: 2021-08-26 09:41:56
Also in:
linux-usb, lkml
Hi, On 8/12/2021 2:37 PM, Felipe Balbi wrote:
Hi, (why isn't this email plain/text? Content Type was set to multipart alternative, please configure your email client correctly :-) While at that, also make sure to break lines at 80-columns) Sandeep Maheswaram [off-list ref] writes:quoted
Hi, Earlier I have posted the patch for usb dwc3 core shutdown callback https://lore.kernel.org/linux-arm-msm/1618380209-20114-1-git-send-email-sanm@codeaurora.org/ (local) and it was reverted due to issues.Right, as should be expected when we find regressionsquoted
https://lore.kernel.org/linux-usb/20210603151742.298243-1-alexandru.elisei@arm.com/ (local) As we already have shutdown callback in xhci plat driver where we halt the controller, so there will be no transactions with usb devices. https://lore.kernel.org/linux-usb/20200306092328.41253-1-ran.wang_1@nxp.com/ (local) So I think dwc3 core shutdown may not be required at least when we are using host mode. Let me know your opinion about this.If that's the case, then sure. Please validate the condition, though, and kindly report back on your findings
I have enabled couple of logs in shutdown path and see no URBs enqueued after xhci shut down. Hope this is enough for validation . Please suggest if anything more I could do. [ 312.862737] systemd-journald[650]: Received SIGTERM from PID 1 (init). [ 312.866332] xhci-hcd xhci-hcd.0.auto: xhci_urb_enqueue [ 312.875205] xhci-hcd xhci-hcd.0.auto: xhci_urb_enqueue [ 312.951045] Unsafe core_pattern used with fs.suid_dumpable=2. [ 312.951045] Pipe handler or fully qualified core dump path required. [ 312.951045] Set kernel.core_pattern before fs.suid_dumpable. [ 312.981364] ip_local_port_range: prefer different parity for start/end values. [ 313.086729] Bluetooth: qca_download_firmware() hci0: QCA Downloading qca/crnv32.bin [ 313.194059] init: console-ttyMSM0 main process (516) killed by TERM signal [ 313.317109] kvm: exiting hardware virtualization [ 313.338988] platform video-firmware.0: Removing from iommu group 14 [ 313.345975] platform wifi-firmware.0: Removing from iommu group 12 [ 313.372244] xhci-hcd xhci-hcd.0.auto: -->xhci_shutdown [ 313.377591] xhci-hcd xhci-hcd.0.auto: // Halt the HC [ 313.382811] xhci-hcd xhci-hcd.0.auto: xhci_shutdown completed - status = 1 [ 313.398238] Bluetooth: qca_uart_setup() hci0: QCA setup on UART is completed [ 313.405583] debugfs: Directory 'ibs' with parent 'hci0' already present! [ 313.439006] Bluetooth: qca_hw_error() hci0: mem_dump_status: 0 [ 313.445073] Bluetooth: qca_send_crashbuffer() hci0: crash the soc to collect controller dump [ 313.595791] arm-smmu 15000000.iommu: disabling translation [ 313.601831] arm-smmu 5040000.iommu: disabling translation [ 313.608559] reboot: Restarting system Regards Sandeep