[PATCH v2 7/7] ARM: dts: broadcom: Add BCM6846 PMB clocks and hardware monitoring

From
Linus Walleij <linusw@kernel.org>
Date
2026-11-01 22:15:33
Also in
linux-clk, linux-devicetree, linux-hwmon
Reply to
Linus Walleij, 2026-11-01
Describe the PMC complex and its PMB interface, including clock, reset
and hwmon child nodes. Supply the PMB clock controller with
its 50 MHz reference and connect PVTMON to its clock and reset
resources. Add a SoC thermal zone referencing the sensor child with a
one-second polling interval.

Leave trip points and cooling maps unspecified because the available
BCM6846 documentation does not establish suitable temperature limits.

Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 arch/arm/boot/dts/broadcom/bcm6846.dtsi | 47 +++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
index 47f177323c18..e9775dfc5d1b 100644
--- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -3,8 +3,10 @@
  * Copyright 2022 Broadcom Ltd.
  */
 
+#include <dt-bindings/clock/brcm,bcm6846-pmb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/brcm,bcm6846-pmb.h>
 
 / {
 	compatible = "brcm,bcm6846", "brcm,bcmbca";
@@ -57,6 +59,12 @@ pmu: pmu {
 	};
 
 	clocks: clocks {
+		osc50m: clock-50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
 		periph_clk: periph-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -75,6 +83,14 @@ psci {
 		method = "smc";
 	};
 
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&pvtmon>;
+		};
+	};
+
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -263,5 +279,36 @@ pl081_dma: dma-controller@59000 {
 			clock-names = "apb_pclk";
 			#dma-cells = <2>;
 		};
+
+		pmc: system-controller@300000 {
+			compatible = "brcm,bcm6846-pmc", "simple-mfd";
+			ranges = <0x0 0x300000 0x21000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmb: bus@20100 {
+				compatible = "brcm,bcm6846-pmb";
+				reg = <0x20100 0x200>;
+
+				pmb_clk: clock-controller {
+					compatible = "brcm,bcm6846-pmb-clock";
+					clocks = <&osc50m>;
+					clock-names = "ref";
+					#clock-cells = <1>;
+				};
+
+				pmb_reset: reset-controller {
+					compatible = "brcm,bcm6846-pmb-reset";
+					#reset-cells = <1>;
+				};
+
+				pvtmon: hwmon {
+					compatible = "brcm,bcm6846-pmb-pvtmon";
+					clocks = <&pmb_clk BCM6846_CLK_PVTMON>;
+					resets = <&pmb_reset BCM6846_RESET_PVTMON>;
+					#thermal-sensor-cells = <0>;
+				};
+			};
+		};
 	};
 };
-- 
2.56.0

Thread (19 messages) 19 messages, 6 authors, last reply 12d ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help