[PATCH v2 0/3] arm64: dts: freescale: imx8mp-toradex-smarc: Add OV5640 overlays

Add OV5640 camera overlays for the Toradex SMARC iMX8MP SoM and its
development carrier board.

The overlays use the camera connector GPIO nexus, so this series
requires the toradex,camera-connector binding from v3 of the Verdin
iMX8M OV5640 series:
https://lore.kernel.org/r/20261022-verdin-imx8mp-hmp-camera-ready-v3-1-90a30b0b0d55@toradex.com (local)

The camera regulator is supplied by the on-carrier 3.3 V rail, which is
described by the first patch.

Signed-off-by: Ernest Van Hoecke <redacted>
---
Changes in v2:
- Include the on-carrier 3.3 V regulator patch, previously posted with
  the SMARC iMX8MP display overlays, which are deferred
- Refer to v3 of the toradex,camera-connector binding
- Rebase onto imx/dt64
- Link to v1: https://lore.kernel.org/r/20261002-v1-smarc-imx8mp-cameras-v1-0-a0e89182c625@toradex.com (local)

---
Ernest Van Hoecke (3):
      arm64: dts: freescale: imx8mp-toradex-smarc: Add on-carrier 3.3V regulator
      arm64: dts: freescale: imx8mp-toradex-smarc: Add camera connector nexus
      arm64: dts: freescale: imx8mp-toradex-smarc: Add OV5640 overlays

 arch/arm64/boot/dts/freescale/Makefile             | 17 +++++
 .../imx8mp-toradex-smarc-csi0-ov5640-24mhz.dtso    | 15 +++++
 .../imx8mp-toradex-smarc-csi0-ov5640.dtso          | 75 ++++++++++++++++++++++
 .../imx8mp-toradex-smarc-csi1-ov5640-24mhz.dtso    | 15 +++++
 .../imx8mp-toradex-smarc-csi1-ov5640.dtso          | 75 ++++++++++++++++++++++
 .../dts/freescale/imx8mp-toradex-smarc-dev.dts     | 33 ++++++++++
 .../boot/dts/freescale/imx8mp-toradex-smarc.dtsi   | 10 ++-
 7 files changed, 238 insertions(+), 2 deletions(-)
---
base-commit: 7f47e8eafbf55a2ad0697e5d28f5e6cff2fa42f9
change-id: 20261002-v1-smarc-imx8mp-cameras-8b664da20da4

Best regards,
-- 
Ernest Van Hoecke [off-list ref]