[PATCH v6 1/3] dt-bindings: input: Add Himax HX83102J touchscreen

@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83102j.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83102j touchscreen
+
+maintainers:
+  - Michał Kopeć <michal@nozomi.space>
+
+description:
+  The Himax HX83102J is a touch and display driver integrated (TDDI)
+  controller. Its touch function is connected over SPI and reports HID
+  packets. The display and touch functions share the analog supplies and
+  the display reset, so the touch function is powered and reset together
+  with the panel it is part of.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: himax,hx83102j
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reset of the touch function. Unlike display-reset-gpios, it only
+      resets the touch MCU and leaves the display function running, so the
+      touch function can be reset without disturbing the panel.
+
+  vccd-supply:
+    description: Digital I/O supply of the touch function.
+
+  vsn-supply:
+    description: Negative analog supply, shared with the display function.
+
+  vsp-supply:
+    description: Positive analog supply, shared with the display function.
+
+  display-reset-gpios:
+    maxItems: 1
+    description:
+      Reset of the display function, usually driven by the panel. Asserting
+      it also resets the touch function.
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  firmware-name:
+    description: Specify the file name for firmware loading.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - panel
+  - vccd-supply
+  - vsn-supply
+  - vsp-supply
+  - display-reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ap_ts: touchscreen@0 {
+        compatible = "himax,hx83102j";
+        reg = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&touch_int0 &touch_reset>;
+        reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+        spi-cpha;
+        spi-cpol;
+        interrupt-parent = <&gpio1>;
+        interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        panel = <&panel>;
+        vccd-supply = <&regulator>;
+        vsn-supply = <&regulator>;
+        vsp-supply = <&regulator>;
+        display-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+      };
+    };

@@ -11729,6 +11729,12 @@ W:	http://www.highpoint-tech.com
 F:	Documentation/scsi/hptiop.rst
 F:	drivers/scsi/hptiop.c
 
+HIMAX HID TOUCHSCREEN
+M:	Michał Kopeć <michal@nozomi.space>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml
+
 HIMAX HX83112B TOUCHSCREEN SUPPORT
 M:	Job Noorman <job@noorman.info>
 L:	linux-input@vger.kernel.org