[PATCH] arm64: dts: st: add thermal zones on stm32mp251
flat view
COOLING4d
From: Mateusz Nowicki <hidden>
Date: 2026-10-04 12:12:28
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Add a CPU and a SoC thermal zone for the two DTS sensors, each with a critical trip point at 120 degrees Celsius, below the 125 degrees Celsius max junction temperature of the STM32MP25. Signed-off-by: Mateusz Nowicki <redacted> --- arch/arm64/boot/dts/st/stm32mp251.dtsi | 28 ++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index b624f998b87c..fd174c88b26d 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi@@ -158,6 +158,34 @@ RET_PD: power-domain-retention { }; }; + thermal-zones { + cpu-thermal { + polling-delay = <1000>; + thermal-sensors = <&dts 1>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + soc-thermal { + polling-delay = <1000>; + thermal-sensors = <&dts 0>; + + trips { + soc-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&intc>;
base-commit: f831584128ac2a36fb4fa62fe106793d08c2dbf1 -- 2.56.0