[PATCH v9 00/15] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <redacted>
---
Changes in v9:
- Add four new DTS updates for Anacapa platform:
  * Add E1.S FRU EEPROM definitions.
  * Add NCT7363 fan controller nodes.
  * Remove conflicting LTC4287 power monitor nodes.
  * Update EDSFF power status signal names from PG to FLT.
- Link to v8: https://lore.kernel.org/r/20260902-anacapa-devlop-phase-devicetree-v8-0-69c8eb2a7cda@gmail.com (local)

Changes in v8:
- Fix [Critical] The board compatible string was silently changed from "facebook,anacapa-bmc" to "facebook,anacapa"
  , breaking dt-bindings and backward compatibility.
- Fix [Low] The /dts-v1/ directive is improperly placed inside a .dtsi include file instead of the top-level .dts file.
  Move "/dts-v1/" into aspeed-bmc-facebook-anacapa.dts
- Link to v7: https://lore.kernel.org/r/20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com (local)

Changes in v7:
- Fix [Critical] Devicetree ABI breakage due to removal of generic compatible string
  keep to use compatible string "facebook,anacapa-bmc".
- Fix [Low] Redundant redefinition of inherited properties in the `evt2.dts` file.
- Fix [Low] Included devicetrees use `.dts` extension instead of `.dtsi`
  aspeed-bmc-facebook-anacapa-evt1.dts -> aspeed-bmc-facebook-anacapa-evt1.dtsi
  aspeed-bmc-facebook-anacapa-evt2.dts -> aspeed-bmc-facebook-anacapa-evt2.dtsi
  aspeed-bmc-facebook-anacapa-dvt.dts -> aspeed-bmc-facebook-anacapa-dvt.dtsi
- Link to v6: https://lore.kernel.org/r/20260825-anacapa-devlop-phase-devicetree-v6-0-9059a2a279ce@gmail.com (local)

Changes in v6:
- Fold the following fixes into this series: 
   - Remove redundant vhub pinctrl-names
   - Use default SPI2 memory mapping
   - Fix dt-check-style strict violations
- Move p3v3_bmc_aux node from evt1.dts to evt2.dts for dt-check-style
- Fix the patch author information
- Link to v5: https://lore.kernel.org/r/20260813-anacapa-devlop-phase-devicetree-v5-0-c7058f63dc67@gmail.com (local)

Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders  
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com (local)

Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com (local)

Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com (local)

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com (local)

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (3):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
      ARM: dts: aspeed: anacapa: Add NCT7363 fan controllers
      ARM: dts: aspeed: anacapa: Remove LTC4287 power monitors

Colin Huang (5):
      ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
      ARM: dts: aspeed: anacapa: Add E1.S FRU EEPROMs

Peter Shen (1):
      ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors

Rex Fu (5):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
      ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
      ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
      ARM: dts: aspeed: anacapa: Add SPI flash VCC supply
      ARM: dts: aspeed: anacapa: Update EDSFF power status signals

 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    |  259 +++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi   | 1165 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   |  467 ++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1077 +-----------------
 4 files changed, 1892 insertions(+), 1076 deletions(-)
---
base-commit: cd7d1ef7d74ed5f5a1790a40389bc38382924556
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang [off-list ref]