[PATCH v2 0/4] arm: sunplus: add SP7021 LTPP3G2 board support

The Tibbo LTPP3G2 is a board based on the Sunplus SP7021 SoC:
https://tibbo.com/store/tps/ltpp3g2.html
It is the platform that underpins Tibbo's IoT products.

This series adds board support to linux-next:

 - Patch 1: vendor prefix for Tibbo Technology Inc.
 - Patch 2: device tree nodes for SP7021 peripherals that have upstream
             drivers (PWM, watchdog, eMMC), plus a label on the
             gpio-leds node so board DTS files can override it.
 - Patch 3: board DTS for the LTPP3G2, covering eMMC, SPI, RTC,
             a bit-banged I2C EEPROM, PWM, watchdog, and two GPIO LEDs.
 - Patch 4: sp7021_defconfig updates to enable the drivers used by the
             LTPP3G2 and correct a few defaults.

Tested on a LTPP3G2, booting via eMMC, on linux-next-20260915.

Changes in v2:
 - fix issues spotted by sashiko-bot.

Andrew Gaylard (4):
  dt-bindings: vendor-prefixes: Add Tibbo
  arm: dts: sunplus: add PWM, watchdog and MMC nodes to SP7021 DTSI
  arm: dts: sunplus: add Tibbo LTPP3G2 board
  configs: sp7021: fix defaults and enable existing device drivers

 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 arch/arm/boot/dts/sunplus/Makefile            |   5 +-
 .../dts/sunplus/sunplus-sp7021-ltpp3g2.dts    | 182 ++++++++++++++++++
 arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi |  37 +++-
 arch/arm/configs/sp7021_defconfig             |  33 +++-
 6 files changed, 260 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/sunplus/sunplus-sp7021-ltpp3g2.dts

-- 
2.53.0