Re: [PATCH v4 03/20] dt-bindings: mfd: Add starfive,jh7110-hdmi-subsystem

The JH7110 HDMI IP is a monolithic block containing both the digital
controller and analog PHY in a single register space. This binding
defines the parent device, which holds the shared register map and
populates its two children: the PHY and the controller. This is
necessary to resolve a circular clock dependency between the HDMI block
and the VOUT clock generator.

Reviewed-by: Joshua Peisach <redacted>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
---
 .../mfd/starfive,jh7110-hdmi-subsystem.yaml        | 95 ++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-subsystem.yaml b/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-subsystem.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..18034d8273b860b71d386cfc63a125f21b20a6b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-subsystem.yaml

@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/starfive,jh7110-hdmi-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 HDMI subsystem
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+description:
+  The StarFive JH7110 HDMI block is a monolithic IP containing both
+  the digital controller logic and the analog PHY logic in a single
+  register space. It sits inside the video output subsystem, which owns
+  the NoC bus clock and reset gating this region and the power domain it
+  belongs to.
+
+properties:
+  compatible:
+    const: starfive,jh7110-hdmi-subsystem
+
+  reg:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/phy/starfive,jh7110-inno-hdmi-phy.yaml#
+
+  controller:
+    $ref: /schemas/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml#