Re: [PATCH v5 1/2] dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller

On Thu, Sep 10, 2026 at 07:22:40AM +0200, Marek Vasut wrote:

The ST STM32MP2 SoC contains single instance of DWC3 USB controller with
glue logic wrapper around it controlled by syscon. Document the glue
logic and DWC3 controller.

Co-developed-by: Pankaj Dev <redacted>
Signed-off-by: Pankaj Dev <redacted>
Co-developed-by: Clément Le Goffic <redacted>
Signed-off-by: Clément Le Goffic <redacted>
Co-developed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Marek Vasut <redacted>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marek Vasut <redacted>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-usb@vger.kernel.org
---
V2: Fix up Sob/Cdb lines
V3: - Document maximum-speed
    - Switch resets to maxItems: 1
    - Drop label from example
    - Use generic over-current-active-low
    - Use ref: snps,dwc3-common.yaml and drop generic dr_mode/maximum-speed/phys/phy-names
V4: - Split this from series arm64: dts: phy: st: usb: Add STM32MP2 USB support
      https://lore.kernel.org/all/20260822074816.548662-1-marex@nabladev.com/ (local)
V5: No change
---
 .../bindings/usb/st,stm32mp25-dwc3.yaml       | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/st,stm32mp25-dwc3.yaml

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>