[PATCH v3 2/3] arm64: dts: ti: k3-am62a: use ti,am62-mcan compatible for m_can devices
From: Kendall Willis <hidden>
Date: 2026-09-12 21:33:20
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Prepend "ti,am62-mcan" to the m_can device compatible property since this compatible adds out-of-band wakeup functionality. The m_can pins can be a wakeup source in the deepest low power states, despite being in power domains which are OFF during deeper low power states since it has the out-of-band wakeup capability. Signed-off-by: Kendall Willis <redacted> --- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 9e5b75a4e88e23c74270b667a0a02d5efd931532..1552029fe4d4945b8fbe87792719c7ec7335bebb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi@@ -848,7 +848,7 @@ mailbox0_cluster3: mailbox@29030000 { }; main_mcan0: can@20701000 { - compatible = "bosch,m_can"; + compatible = "ti,am62-mcan", "bosch,m_can"; reg = <0x00 0x20701000 0x00 0x200>, <0x00 0x20708000 0x00 0x8000>; reg-names = "m_can", "message_ram";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index d22caa7c346b35dcb11163a5e73e17790ff751dd..b9a66e884434132dbfe93811578ca436e8c6103f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi@@ -152,7 +152,7 @@ mcu_rti0: watchdog@4880000 { }; mcu_mcan0: can@4e08000 { - compatible = "bosch,m_can"; + compatible = "ti,am62-mcan", "bosch,m_can"; reg = <0x00 0x4e08000 0x00 0x200>, <0x00 0x4e00000 0x00 0x8000>; reg-names = "m_can", "message_ram";
@@ -164,7 +164,7 @@ mcu_mcan0: can@4e08000 { }; mcu_mcan1: can@4e18000 { - compatible = "bosch,m_can"; + compatible = "ti,am62-mcan", "bosch,m_can"; reg = <0x00 0x4e18000 0x00 0x200>, <0x00 0x4e10000 0x00 0x8000>; reg-names = "m_can", "message_ram";
--
2.34.1