Thread (2 messages) flat view 2 messages, 2 authors, 5d ago
COOLING5d

[PATCH] dmaengine: st_fdma: fix potential use-after-free in vchan tasklets

From: Guangshuo Li <hidden>
Date: 2026-09-12 15:46:43
Also in: dmaengine, lkml, stable
Subsystem: arm/sti architecture, dma generic offload engine subsystem, the rest · Maintainers: Patrice Chotard, Vinod Koul, Linus Torvalds

st_fdma_probe() allocates the channel array with devm_kcalloc() and
initializes an embedded virt-dma tasklet for each st_fdma_chan through
vchan_init().

The interrupt handler calls vchan_cookie_complete() or
vchan_cyclic_callback(), which may schedule the tasklet. However,
st_fdma_remove() only frees the IRQ and does not kill already scheduled
tasklets.

devm_free_irq() prevents new interrupt handlers from running and waits
for an in-flight handler to finish, but it does not flush a tasklet
that was scheduled by a previous interrupt. Since fdev->chans is
devm-managed, the channel array is released after the remove callback
returns.

This leaves the following possible race:

  CPU0 (driver removal)                 CPU1 (IRQ / softirq)
  ---------------------                 --------------------
                                        st_fdma_irq_handler()
                                          vchan_cookie_complete()
                                            tasklet_schedule()
                                        return
                                        <tasklet pending>

  st_fdma_remove()
    devm_free_irq()
    ...
    return

  devres cleanup
    ...
    kfree(fdev->chans)                  // FREE
                                        vchan_complete()
                                          vc = from_tasklet(...)
                                          spin_lock_irq(&vc->lock)
                                                       // USE -> UAF

The pending tasklet is embedded in the devm-allocated st_fdma_chan.
Once fdev->chans is released, the tasklet and the virt_dma_chan
containing it point into freed memory. A later vchan_complete() can
therefore dereference the freed channel and cause a potential
use-after-free.

Kill all vchan tasklets after freeing the IRQ. This prevents new
interrupt handlers from scheduling them and waits for any tasklet that
is already pending or running before the channel storage can be
released.

This issue was found by manual code inspection.

Fixes: 6b4cd727eaf15 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <redacted>
---
 drivers/dma/st_fdma.c | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/drivers/dma/st_fdma.c b/drivers/dma/st_fdma.c
index d9547017f3bd..23071cbf1866 100644
--- a/drivers/dma/st_fdma.c
+++ b/drivers/dma/st_fdma.c
@@ -846,8 +846,13 @@ static int st_fdma_probe(struct platform_device *pdev)
 static void st_fdma_remove(struct platform_device *pdev)
 {
 	struct st_fdma_dev *fdev = platform_get_drvdata(pdev);
+	int i;
 
 	devm_free_irq(&pdev->dev, fdev->irq, fdev);
+
+	for (i = 0; i < fdev->nr_channels; i++)
+		tasklet_kill(&fdev->chans[i].vchan.task);
+
 	st_slim_rproc_put(fdev->slim_rproc);
 	of_dma_controller_free(pdev->dev.of_node);
 }
-- 
2.43.0

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help