[PATCH 11/13] ARM: versatile: remove mps2 support

@@ -443,20 +443,6 @@ source "arch/arm/mach-zte/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
 
-config ARCH_MPS2
-	bool "ARM MPS2 platform (DEPRECATED)"
-	depends on ARM_SINGLE_ARMV7M
-	select ARM_AMBA
-	select CLKSRC_MPS2
-	help
-	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
-	  with a range of available cores like Cortex-M3/M4/M7.
-
-	  Please, note that depends which Application Note is used memory map
-	  for the platform may vary, so adjustment of RAM base might be needed.
-
-	  This platform is scheduled for removal in early 2027
-
 # Definitions to make life easier
 config PLAT_ORION
 	bool

@@ -3,9 +3,6 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorap-im-pd1.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \

@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "mps2.dtsi"
-
-/ {
-	model = "ARM MPS2 Application Note 385/386";
-	compatible = "arm,mps2";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:9600n8";
-	};
-
-	memory@21000000 {
-		device_type = "memory";
-		reg = <0x21000000 0x1000000>;
-	};
-
-	smb {
-		ethernet@0,0 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0 0x0 0x10000>;
-			interrupts = <13>;
-			interrupt-parent = <&nvic>;
-			smsc,irq-active-high;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&timer1 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};

@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "mps2.dtsi"
-
-/ {
-	model = "ARM MPS2 Application Note 399/400";
-	compatible = "arm,mps2";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:9600n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x1000000>;
-	};
-
-	smb {
-		ethernet@1,0 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <1 0x0 0x10000>;
-			interrupts = <13>;
-			interrupt-parent = <&nvic>;
-			smsc,irq-active-high;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&timer1 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};

@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "../armv7-m.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	oscclk0: clock-50000000 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	oscclk1: clock-24576000 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	oscclk2: clock-25000000 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	cfgclk: clock-5000000 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <5000000>;
-	};
-
-	spicfgclk: clock-75000000 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	audmclk: clk-12388000 {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk1>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	audsclk: clk-3072000 {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk1>;
-		#clock-cells = <0>;
-		clock-div = <8>;
-		clock-mult = <1>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		ranges;
-
-		apb@40000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x40000000 0x10000>;
-
-			timer0: mps2-timer0@0 {
-				compatible = "arm,mps2-timer";
-				reg = <0x0 0x1000>;
-				interrupts = <8>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			timer1: mps2-timer1@1000 {
-				compatible = "arm,mps2-timer";
-				reg = <0x1000 0x1000>;
-				interrupts = <9>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			timer2: dual-timer@2000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x2000 0x1000>;
-				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
-				clock-names = "timer0clk", "timer1clk",
-					       "apb_pclk";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			uart0: serial@4000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x4000 0x1000>;
-				interrupts = <0>, <1>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			uart1: serial@5000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x5000 0x1000>;
-				interrupts = <2>, <3>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			uart2: serial@6000 {
-				compatible = "arm,mps2-uart";
-				reg = <0x6000 0x1000>;
-				interrupts = <4>, <5>, <12>;
-				clocks = <&sysclk>;
-				status = "disabled";
-			};
-
-			wdt: watchdog@8000 {
-				compatible = "arm,sp805", "arm,primecell";
-				arm,primecell-periphid = <0x00141805>;
-				reg = <0x8000 0x1000>;
-				interrupts = <0>;
-				clocks = <&sysclk>, <&sysclk>;
-				clock-names = "wdog_clk", "apb_pclk";
-				status = "disabled";
-			};
-		};
-	};
-
-	fpga@40020000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x40020000 0x10000>;
-
-		fpgaio@8000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x8000 0x10>;
-
-			ranges = <0x0 0x8000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@0,0 {
-				compatible = "register-bit-led";
-				reg = <0x00 0x04>;
-				offset = <0x0>;
-				mask = <0x01>;
-				label = "userled:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-
-			led@0,1 {
-				compatible = "register-bit-led";
-				reg = <0x00 0x04>;
-				offset = <0x0>;
-				mask = <0x02>;
-				label = "userled:1";
-				linux,default-trigger = "usr";
-				default-state = "off";
-			};
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40200000 0x10000>,
-			 <1 0 0xa0000000 0x10000>;
-	};
-};

@@ -1,102 +0,0 @@
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-CONFIG_BASE_SMALL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_MMU is not set
-CONFIG_ARCH_MPS2=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x21000000
-CONFIG_DRAM_SIZE=0x1000000
-# CONFIG_SUSPEND is not set
-# CONFIG_BLOCK is not set
-CONFIG_BINFMT_FLAT=y
-# CONFIG_COREDUMP is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CORE is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_EZCHIP is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_HISILICON is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_QUALCOMM is not set
-# CONFIG_NET_VENDOR_RENESAS is not set
-# CONFIG_NET_VENDOR_ROCKER is not set
-# CONFIG_NET_VENDOR_SAMSUNG is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_MPS2_UART_CONSOLE=y
-CONFIG_SERIAL_MPS2_UART=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_ARM_SP805_WATCHDOG=y
-CONFIG_MFD_SYSCON=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_ARM_TIMER_SP804=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_MEMTEST=y

@@ -22,9 +22,6 @@ obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
 CFLAGS_tc2_pm.o				+= -march=armv7-a
 CFLAGS_REMOVE_tc2_pm.o			= -pg
 
-# mps2
-obj-$(CONFIG_ARCH_MPS2)			+= v2m-mps2.o
-
 ifdef CONFIG_SMP
 obj-y					+= headsmp.o platsmp.o
 obj-$(CONFIG_ARCH_REALVIEW)		+= platsmp-realview.o

@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Vladimir Murzin <vladimir.murzin@arm.com>
- */
-
-#include <asm/mach/arch.h>
-
-static const char *const mps2_compat[] __initconst = {
-	"arm,mps2",
-	NULL
-};
-
-DT_MACHINE_START(MPS2DT, "MPS2 (Device Tree Support)")
-	.dt_compat = mps2_compat,
-MACHINE_END

@@ -1260,7 +1260,7 @@ config I2C_UNIPHIER_F
 
 config I2C_VERSATILE
 	tristate "ARM Versatile/Realview I2C bus support"
-	depends on ARCH_MPS2 || ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
+	depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
 	select I2C_ALGOBIT
 	help
 	  Say yes if you want to support the I2C serial bus on ARMs Versatile