Hello Michal,
On 9/4/2026 9:27 PM, Michal Wilczynski wrote:
The Innosilicon HDMI PHY IP is used by several SoCs. They differ in
where the PHY register block sits in the register space and in which
pixel clocks they support, but the pre-PLL programming sequence and the
layout of its registers are the same.
Add a small library holding that shared part: the pre-PLL configuration
table format, a lookup, clk_ops determine_rate and recalc_rate helpers,
and the pre-PLL register programming. Callers pass a regmap, a register
offset for the PHY block, and their own pixel clock table.
No driver uses it yet; the users are converted separately.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
---
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-inno-hdmi.c | 298 ++++++++++++++++++++++++++++++++++++++
include/linux/phy/inno-hdmi-phy.h | 85 +++++++++++
4 files changed, 392 insertions(+)
Reviewed-by: Chaoyi Chen <redacted>
--
Best,
Chaoyi