[PATCH v6 06/12] arm64: dts: rockchip: rk3588s-nanopi-r6: remove always-on and boot-on from vdd_npu_s0 reg
From: Joachim Eastwood via B4 Relay <devnull+joachim.eastwood.gmail.com@kernel.org>
Date: 2026-09-03 21:23:46
Also in:
b4-sent, linux-devicetree, linux-rockchip
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Joachim Eastwood <redacted> Since the NPU is hooked up in DT, the always-on and boot-on properties on the regulator isn't needed anymore. Signed-off-by: Joachim Eastwood <redacted> --- arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index b120dd98241f..8953dcebb93e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi@@ -314,8 +314,6 @@ vdd_npu_s0: regulator@42 { regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <2300>; - regulator-boot-on; - regulator-always-on; vin-supply = <&vcc5v0_sys>; regulator-state-mem {
--
2.55.0