[PATCH 13/19] thunderbolt: Add QUIRK_NO_DMA_PORT

@@ -168,6 +168,7 @@ struct tb_nhi_ops {
 #define QUIRK_AUTO_CLEAR_INT				BIT(0)
 #define QUIRK_E2E					BIT(1)
 #define QUIRK_RESET_DMA_ON_TEARDOWN			BIT(2)
+#define QUIRK_NO_DMA_PORT				BIT(3)
 
 /*
  * Minimal number of vectors when we use MSI-X. Two for control channel

@@ -3317,10 +3317,12 @@ int tb_switch_add(struct tb_switch *sw)
 	 * to the userspace. NVM can be accessed through DMA
 	 * configuration based mailbox.
 	 */
-	ret = tb_switch_add_dma_port(sw);
-	if (ret) {
-		dev_err(&sw->dev, "failed to add DMA port\n");
-		return ret;
+	if (!sw->no_dma_port) {
+		ret = tb_switch_add_dma_port(sw);
+		if (ret) {
+			dev_err(&sw->dev, "failed to add DMA port\n");
+			return ret;
+		}
 	}
 
 	ret = tb_switch_nvm_init(sw);

@@ -15,6 +15,7 @@
 #include "tb.h"
 #include "tb_regs.h"
 #include "tunnel.h"
+#include "nhi.h"
 
 #define TB_TIMEOUT		100	/* ms */
 #define TB_RELEASE_BW_TIMEOUT	10000	/* ms */

@@ -3036,6 +3037,13 @@ static int tb_start(struct tb *tb, bool reset)
 	/* All USB4 routers support runtime PM */
 	tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch);
 
+	/*
+	 * Apple Silicon machines have a separate, proprietary mechanism for
+	 * loading and updating firmware. Skip the DMA port initialization on
+	 * these machines.
+	 */
+	tb->root_switch->no_dma_port = tb->nhi->quirks & QUIRK_NO_DMA_PORT;
+
 	ret = tb_switch_configure(tb->root_switch);
 	if (ret) {
 		tb_switch_put(tb->root_switch);

@@ -139,6 +139,7 @@ struct tb_switch_tmu {
  * @drom: DROM of the switch (%NULL if not found)
  * @nvm: Pointer to the NVM if the switch has one (%NULL otherwise)
  * @no_nvm_upgrade: Prevent NVM upgrade of this switch
+ * @no_dma_port: Prevent adding the DMA port of this switch
  * @safe_mode: The switch is in safe-mode
  * @boot: Whether the switch was already authorized on boot or not
  * @rpm: The switch supports runtime PM

@@ -194,6 +195,7 @@ struct tb_switch {
 	u8 *drom;
 	struct tb_nvm *nvm;
 	bool no_nvm_upgrade;
+	bool no_dma_port;
 	bool safe_mode;
 	bool boot;
 	bool rpm;