[PATCH v3] i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
From: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Date: 2026-08-18 15:35:24
Also in:
linux-i2c, lkml
Subsystem:
arm/zynq architecture, i2c subsystem, i2c subsystem host drivers, the rest · Maintainers:
Michal Simek, Andi Shyti, Linus Torvalds
The devres conversion replaced manual pm_runtime_enable()/disable() with
devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime
PM teardown. The managed release tears runtime PM down in the wrong
order: it calls pm_runtime_dont_use_autosuspend() before
pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres
is LIFO so the devm_clk_get_enabled() release runs afterwards.
At remove(), pm_runtime_put_sync() leaves the device active with the
autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle()
suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the
clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s
the already-disabled clock, so clk_core_disable() WARNs ("clkN already
disabled") on every teardown.
Drop the managed helper and restore the non-managed runtime PM setup and
teardown, so runtime PM is enabled once in probe and disabled once in
remove and the clock enable count stays balanced.
Fixes: 50c63491ff26 ("i2c: xiic: switch to devres managed APIs")
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
Changes in v3:
- Drop the managed devm_pm_runtime_set_active_enabled() helper entirely
and restore the non-managed runtime PM setup (pm_runtime_set_active +
pm_runtime_enable, with probe error unwinding) and teardown
(pm_runtime_disable + set_suspended + dont_use_autosuspend), so the
disable depth stays balanced rather than being disabled twice (Andi).
- Link to v2: https://patch.msgid.link/20260814-i2c-xiic-restore-runtime-pm-teardown-v2-1-7ae5d0c30ff2@nexthop.ai
Changes in v2:
- Move the Signed-off-by into the commit message proper (Andy).
- Link to v1: https://patch.msgid.link/20260813-i2c-xiic-restore-runtime-pm-teardown-v1-1-0e7dfb206790@nexthop.ai
To: Michal Simek <michal.simek@amd.com>
To: Andi Shyti <andi.shyti@kernel.org>
To: Abdurrahman Hussain <abdurrahman@nexthop.ai>
To: Andy Shevchenko <redacted>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/i2c/busses/i2c-xiic.c | 29 ++++++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 3e7735e1dae0..85f3c322b1a2 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c@@ -1475,9 +1475,13 @@ static int xiic_i2c_probe(struct platform_device *pdev) pm_runtime_set_autosuspend_delay(dev, XIIC_PM_TIMEOUT); pm_runtime_use_autosuspend(dev); - ret = devm_pm_runtime_set_active_enabled(dev); - if (ret) - return ret; + /* + * Enable runtime PM by hand: devm_pm_runtime_set_active_enabled() + * tears down in an order that races the devm-enabled clock release and + * makes clk_core_disable() WARN (see xiic_i2c_remove()). + */ + pm_runtime_set_active(dev); + pm_runtime_enable(dev); /* SCL frequency configuration */ i2c->input_clk = clk_get_rate(i2c->clk);
@@ -1489,7 +1493,7 @@ static int xiic_i2c_probe(struct platform_device *pdev) ret = devm_request_threaded_irq(dev, irq, NULL, xiic_process, IRQF_ONESHOT, pdev->name, i2c); if (ret) - return ret; + goto err_pm_disable; i2c->singlemaster = device_property_read_bool(dev, "single-master");
@@ -1506,14 +1510,16 @@ static int xiic_i2c_probe(struct platform_device *pdev) i2c->endianness = BIG; ret = xiic_reinit(i2c); - if (ret) - return dev_err_probe(dev, ret, "Cannot xiic_reinit\n"); + if (ret) { + dev_err_probe(dev, ret, "Cannot xiic_reinit\n"); + goto err_pm_disable; + } /* add i2c adapter to i2c tree */ ret = i2c_add_numbered_adapter(&i2c->adap); if (ret) { xiic_deinit(i2c); - return ret; + goto err_pm_disable; } if (pdata) {
@@ -1526,6 +1532,12 @@ static int xiic_i2c_probe(struct platform_device *pdev) res, irq, i2c->i2c_clk); return 0; + +err_pm_disable: + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + return ret; } static void xiic_i2c_remove(struct platform_device *pdev)
@@ -1545,6 +1557,9 @@ static void xiic_i2c_remove(struct platform_device *pdev) xiic_deinit(i2c); pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_dont_use_autosuspend(dev); } static const struct dev_pm_ops xiic_dev_pm_ops = {
--- base-commit: d58772d8520c7ef247c4b95c9bd76d3a25da9ff5 change-id: 20260813-i2c-xiic-restore-runtime-pm-teardown-dd0ab1db2c02 Best regards, -- Abdurrahman Hussain [off-list ref]