[PATCH v5 6/6] ARM: dts: aspeed: g6: add aspeed,vuart-over-pci prop to vuart3 and 4
flat view
STALE76d
SUPERSEDED
From: Grégoire Layet <hidden>
Date: 2026-08-05 12:21:05
Also in:
linux-aspeed, linux-devicetree, linux-serial, lkml
Subsystem:
arm/aspeed machine support, the rest · Maintainers:
Joel Stanley, Andrew Jeffery, Linus Torvalds
Status: Superseded by v6 (posted 2026-08-18). [go to v6]
Revision v5 (4 revisions archived).
Revisions (4)
The VUART 3 and 4 are VUART over PCI. Set this flag to indicate this information. Also set the syscon phandle. Signed-off-by: Grégoire Layet <redacted> --- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 7c02633f2bd6..fbd7ab6332a1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi@@ -722,7 +722,9 @@ vuart3: serial@1e787800 { reg-shift = <2>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + aspeed,scu-syscon = <&syscon>; no-loopback-test; + aspeed,vuart-over-pci; status = "disabled"; };
@@ -742,7 +744,9 @@ vuart4: serial@1e788800 { reg-shift = <2>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + aspeed,scu-syscon = <&syscon>; no-loopback-test; + aspeed,vuart-over-pci; status = "disabled"; };
--
2.54.0