[PATCH v9 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node

From
Ronald Claveau via B4 Relay <devnull+linux-kernel-dev.aliel.fr@kernel.org>
Date
2026-08-05 08:08:23
Also in
b4-sent, linux-amlogic, linux-devicetree, linux-i2c, linux-pm, lkml
Reply to
Ronald Claveau via B4 Relay, 2026-08-05
From: Ronald Claveau <redacted>

Enable and configure i2c MCU node to get fan working on Khadas VIM4.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ronald Claveau <redacted>
---
 .../boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts      | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
index c41525a34b721..7d95aadcf6a66 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -167,6 +167,19 @@ xtal: xtal-clk {
 	};
 };
 
+&i2c_m_ao_a {
+	status = "okay";
+	pinctrl-0 = <&i2c0_ao_d_pins>;
+	pinctrl-names = "default";
+
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,vim4-mcu";
+		reg = <0x18>;
+		fan-supply = <&vcc5v>;
+		#cooling-cells = <2>;
+	};
+};
+
 &pwm_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_a_pins>;
-- 
2.49.0


Thread (9 messages) 9 messages, 3 authors, last reply 2026-08-19
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help