[PATCH v12 18/36] phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit
From: Sebastian Reichel <hidden>
Date: 2026-07-10 20:56:40
Also in:
linux-devicetree, linux-phy, linux-rockchip, linux-usb, lkml
Subsystem:
arm/rockchip soc support, generic phy framework, the rest · Maintainers:
Heiko Stuebner, Vinod Koul, Linus Torvalds
Right now the mode_change property is set whenever the mode changes between USB-only, DP-only and USB-DP. It is needed, because on any mode change the PHY needs to be re-initialized. Apparently at least DP also requires a re-init when the cable orientation is changed, which is currently not being done (except when the orientation switch also involves a mode change). Prepare for this by renaming mode_change to phy_needs_reinit. Signed-off-by: Sebastian Reichel <redacted> --- drivers/phy/rockchip/phy-rockchip-usbdp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 24108816e3b9..e44d19c9d119 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c@@ -171,7 +171,7 @@ struct rk_udphy { /* PHY status management */ bool flip; - bool mode_change; + bool phy_needs_reinit; u8 mode; u8 status;
@@ -578,7 +578,7 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode) if (udphy->mode == mode) return; - udphy->mode_change = true; + udphy->phy_needs_reinit = true; udphy->mode = mode; }
@@ -951,15 +951,15 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode) if (udphy->mode & UDPHY_MODE_USB) rk_udphy_u3_port_disable(udphy, false); - udphy->mode_change = false; - } else if (udphy->mode_change) { + udphy->phy_needs_reinit = false; + } else if (udphy->phy_needs_reinit) { if (udphy->mode == UDPHY_MODE_DP) rk_udphy_u3_port_disable(udphy, true); ret = rk_udphy_init(udphy); if (ret) return ret; - udphy->mode_change = false; + udphy->phy_needs_reinit = false; } udphy->status |= mode;
--
2.53.0