If devm_clk_bulk_get_all() returns -EPROBE_DEFER, it is replaced with
-ENODEV, permanently failing the driver probe instead of allowing it to
defer. Avoid masking the error code to fix the issue.

This effectively drops returning -ENODEV in case no clocks are being
described in DT. This special case will now be handled by the follow-up
check searching for "refclk" and exit with -EINVAL.

None of this will be hit in practice, since the driver is only used by
RK3588 and RK3576 - on these platforms the DT is validated to contain
the clocks and the clock driver is force probed early. Thus there is
no need to backport this.

Fixes: 2f70bbddeb45 ("phy: rockchip: add usbdp combo phy driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-phy/20260612164107.C7DB21F000E9@smtp.kernel.org/ (local)
Signed-off-by: Sebastian Reichel <redacted>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 12dfdd470a78..2845a012eafc 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c

@@ -427,8 +427,8 @@ static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev)
 	int i;
 
 	udphy->num_clks = devm_clk_bulk_get_all(dev, &udphy->clks);
-	if (udphy->num_clks < 1)
-		return -ENODEV;
+	if (udphy->num_clks < 0)
+		return udphy->num_clks;
 
 	/* used for configure phy reference clock frequency */
 	for (i = 0; i < udphy->num_clks; i++) {

-- 
2.53.0