This series adds support for the Network Packet ACcelerator (NPAC)
client driver. NPAC is a hardware accelerator for offloading
packet processing tasks from the various hosts on TI's TDA5 family
of SoCs.

This is a minimal reference implementation to establish the framework
for NPAC acceleration support in the Linux kernel. Further details
are in patch 1 which adds documentation for the driver and describes
the system architecture, driver interface, and execution flows.

This RFC is submitted for getting feedback on the initial implementation.

Jaspinder Budhal (2):
  Documentation: accel: Add NPAC client driver documentation
  accel/npac: Add NPAC client driver

 Documentation/accel/npac.rst  | 142 ++++++++++++++++++++++
 drivers/accel/Kconfig         |   1 +
 drivers/accel/Makefile        |   1 +
 drivers/accel/npac/Kconfig    |  13 ++
 drivers/accel/npac/Makefile   |   3 +
 drivers/accel/npac/npac_drv.c | 218 ++++++++++++++++++++++++++++++++++
 6 files changed, 378 insertions(+)
 create mode 100644 Documentation/accel/npac.rst
 create mode 100644 drivers/accel/npac/Kconfig
 create mode 100644 drivers/accel/npac/Makefile
 create mode 100644 drivers/accel/npac/npac_drv.c

-- 
2.34.1