Re: [PATCH 2/8] power: sequencing: pcie-m2: Add PCI ID for NXP 88W9098 and AW693 Bluetooth
From: Manivannan Sadhasivam <mani@kernel.org>
Date: 2026-06-22 15:42:22
Also in:
imx, linux-bluetooth, linux-devicetree, linux-pci, linux-pm, lkml
On Thu, Jun 18, 2026 at 06:10:41PM +0800, Sherry Sun (OSS) wrote:
From: Sherry Sun <redacted> 88W9098 is a NXP Wi-Fi/BT combo chip with PCI device ID 0x2b43 under Marvell Extended vendor ID. AW693 is a NXP Wi-Fi/BT combo chip with PCI device ID 0x3003 under NXP/Philips vendor ID. Add both chips to pwrseq_m2_pci_ids[] so that the pwrseq-pcie-m2 driver can create the Bluetooth serdev device when these cards are inserted into a PCIe M.2 Key E connector. Both chips use "nxp,88w8987-bt" as the serdev compatible string, which is the entry point for the btnxpuart driver. The driver identifies the actual chip variant at runtime via chip ID auto-detection and loads the appropriate firmware accordingly. Signed-off-by: Sherry Sun <redacted>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> - Mani
quoted hunk ↗ jump to hunk
--- drivers/power/sequencing/pwrseq-pcie-m2.c | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c index 94c3f4b7ee36..9217ffcfa6e5 100644 --- a/drivers/power/sequencing/pwrseq-pcie-m2.c +++ b/drivers/power/sequencing/pwrseq-pcie-m2.c@@ -186,6 +186,10 @@ static int pwrseq_pcie_m2_match(struct pwrseq_device *pwrseq, } static const struct pci_device_id pwrseq_m2_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x2b43), + .driver_data = (kernel_ulong_t)"nxp,88w8987-bt" }, + { PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, 0x3003), + .driver_data = (kernel_ulong_t)"nxp,88w8987-bt" }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x1107), .driver_data = (kernel_ulong_t)"qcom,wcn7850-bt" }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x1103),-- 2.50.1
-- மணிவண்ணன் சதாசிவம்