Re: [PATCH v2] arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boards

From: Frank Li <Frank.Li@nxp.com>


On Tue, 24 Mar 2026 20:04:19 +0100, Marek Vasut wrote:

Add DT overlays to support DH i.MX8M Plus DHCOM SoM variants and carrier
board expansion modules. The following DT overlays are implemented:
- SoM:
  - DH 660-x00 SoM with 1xRMII PHY
  - DH 660-x00 SoM with 2xRMII PHY
- PDK2:
  - DH 505-200 Display board in edge connector X12 via direct LVDS
  - DH 531-100 SPI/I2C board in header X21
  - DH 531-200 SPI/I2C board in header X22
  - DH 560-200 Display board in edge connector X12
- PDK3:
  - DH 505-200 Display board in edge connector X36 via direct LVDS
  - DH 531-100 SPI/I2C board in header X40
  - DH 531-200 SPI/I2C board in header X41
  - DH 560-300 Display board in edge connector X36
  - EA muRata 2AE M.2 A/E-Key card in connector X20
  - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X31
  - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X29
- PicoITX:
  - DH 626-100 Display board in edge connector X2

[...]

Applied, thanks!

[1/1] arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boards
      commit: 244b25e43c15b6d9e5b5c0f5187743eb2fe7a5b8

Best regards,
-- 
Frank Li [off-list ref]