[PATCH 0/4] crypto: rockchip: Add RK356x/RK3588 cryptographic

This series adds support for the second-generation (V2) Rockchip
cryptographic hardware accelerator found on RK3568 and RK3588 SoCs.

The IP block provides AES (ECB, CBC, XTS) and hash (SHA-1, SHA-256,
SHA-384, SHA-512, MD5, SM3) offload via an LLI-based DMA engine.

The series is ordered as required: binding first, then driver, then
the two DTS nodes that reference the binding.

A prerequisite patch removing SECURECRU reset definitions from the
non-secure CRU driver is sent separately to the clk/reset tree, as it
touches a different subsystem. That patch is not a hard dependency for
the driver to build or load, but it is needed for correctness on RK3588:
those register offsets map into TrustZone-protected MMIO and must not be
accessed directly by Linux.

This work started from unmerged patches by Corentin Labbe
[off-list ref] posted at:
https://patchew.org/linux/20231107155532.3747113-1-clabbe@baylibre.com/

The implementation has been substantially reworked. Notable changes from
Corentin's original series:
  - DMA descriptor race condition and DMA mapping leak on timeout fixed
  - Per-device algorithm copy replaces global device list, removing a
    locking bottleneck and correctly supporting multiple instances
  - Runtime PM autosuspend added; clocks and reset gated between requests
  - Multi-SG hash requests routed to software fallback (hardware padding
    engine requires total message length upfront and cannot maintain
    state across LLI boundaries)
  - Hardware interrupt enable register write corrected to use the
    HIWORD_UPDATE mask that the hardware requires
  - Software fallback for all registered algorithms; statesize promotion
    for export/import compatibility with ARM Crypto Extensions drivers
  - SCMI reset and clock references in DTS corrected for RK3588

Tested on Orange Pi 5 Pro (RK3588S). All nine algorithm selftests pass.
AES-CBC throughput measured at ~100 MiB/s with cryptsetup. PM
autosuspend/resume verified over 1000 consecutive hash requests with no
errors. 20 modprobe/rmmod cycles produce no DMA coherent memory leaks.

Patch series for the crypto subsystem:
  [1/4] dt-bindings: crypto: rockchip: Add RK356x/RK3588 crypto engine
  binding
  [2/4] crypto: rockchip: Add RK356x/RK3588 cryptographic offloader driver
  [3/4] arm64: dts: rockchip: Add crypto node to rk356x-base
  [4/4] arm64: dts: rockchip: Add crypto node to rk3588-base

Separate patch for clk/reset tree:
  clk: rockchip: rk3588: Remove SECURECRU reset definitions

Signed-off-by: Dawid Olesinski <redacted>

Dawid Olesinski (4):
  dt-bindings: crypto: rockchip: Add RK356x/RK3588 crypto engine binding
  crypto: rockchip: Add RK356x/RK3588 cryptographic offloader driver
  arm64: dts: rockchip: Add crypto node to rk356x-base
  arm64: dts: rockchip: Add crypto node to rk3588-base

 .../crypto/rockchip,rk3588-crypto.yaml        |  69 ++
 arch/arm64/boot/dts/rockchip/rk356x-base.dtsi |  12 +
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi |  12 +
 drivers/crypto/Kconfig                        |  33 +
 drivers/crypto/Makefile                       |   1 +
 drivers/crypto/rockchip/Makefile              |   5 +
 drivers/crypto/rockchip/rk2_crypto.c          | 740 ++++++++++++++++++
 drivers/crypto/rockchip/rk2_crypto.h          | 243 ++++++
 drivers/crypto/rockchip/rk2_crypto_ahash.c    | 547 +++++++++++++
 drivers/crypto/rockchip/rk2_crypto_skcipher.c | 724 +++++++++++++++++
 10 files changed, 2386 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/rockchip,rk3588-crypto.yaml
 create mode 100644 drivers/crypto/rockchip/rk2_crypto.c
 create mode 100644 drivers/crypto/rockchip/rk2_crypto.h
 create mode 100644 drivers/crypto/rockchip/rk2_crypto_ahash.c
 create mode 100644 drivers/crypto/rockchip/rk2_crypto_skcipher.c

-- 
2.47.3