[PATCH v2 1/3] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint
From: Damon Ding <hidden>
Date: 2026-05-21 11:45:32
Also in:
dri-devel, linux-devicetree, linux-rockchip, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add data-lanes property support to the port@1 endpoint for physical lane mapping configuration. Lane mapping is mainly used for below scenarios: 1. Correct PCB lane swap and differential line routing crossover without hardware changes; 2. Adapt mismatched lane pin definitions between SoC and eDP panel; 3. Support multiple panel hardware variants on the same board by configuring data-lanes in device tree only. Signed-off-by: Damon Ding <redacted> --- Changes in v2: - Add lane mapping application scenarios in commit message. - Remove redundant deprecated property 'data-lanes' for eDP node. - Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base. --- .../bindings/display/bridge/analogix,dp.yaml | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index 62f0521b0924..e34fdb21adb4 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml@@ -42,13 +42,20 @@ properties: properties: port@0: $ref: /schemas/graph.yaml#/properties/port - description: - Input node to receive pixel data. + description: Input node to receive pixel data. port@1: - $ref: /schemas/graph.yaml#/properties/port - description: - Port node with one endpoint connected to a dp-connector node. + $ref: /schemas/graph.yaml#/$defs/port-base + description: Port node with one endpoint connected to sink device node. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + properties: + data-lanes: + minItems: 1 + maxItems: 4 + items: + enum: [ 0, 1, 2, 3 ] required: - port@0
--
2.34.1