[PATCH 0/3] arm64: dts: imx8m: Correct PAD settings for PMIC_nINT (2nd part)

There was a patchset for i.MX8MP [1], but after further check,
i.MX8MM/N were missed, there are three boards that might also has
interrupt storm issue. I not have the boards, per NXP board design
, PMIC_nINT requires CPU internal pull up, I think most vendors will
follow NXP design. So updates the i.MX8MM/N boards, but I not have
the boards for testing. If board owners would give a test, that would
be great.

[1] https://lore.kernel.org/all/20260326-imx8mp-dts-fix-v2-v2-0-62c4ce727448@nxp.com/ (local)

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Peng Fan (3):
      arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
      arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
      arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT

 arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
---
base-commit: 3b058d1aeeeff27a7289529c4944291613b364e9
change-id: 20260329-imx8m-regulator-4e2e3f1b6ed5

Best regards,
-- 
Peng Fan [off-list ref]