bss_rlm_tlv() in mt7925_mcu_bss_rlm_tlv() has no case for
NL80211_CHAN_WIDTH_320. When associated to a 320MHz BSS, the switch
falls through to default and sends bw=0 (CMD_CBW_20MHZ) to firmware
via BSS_RLM TLV. Firmware then configures the RX radio for 20MHz
and cannot decode the AP's 320MHz frames, resulting in complete data
path failure at 320MHz.

Add the missing NL80211_CHAN_WIDTH_320 case with CMD_CBW_320MHZ and
center_chan2.

Tested on ASUS RT-BE92U: 320MHz throughput goes from 0 Mbps to
841 Mbps (iperf3 -t30 -P8), PHY 4803 Mbps EHT-MCS11.

Reported-by: 张旭涵 <redacted>
Closes: https://github.com/openwrt/mt76/issues/927
Tested-by: 张旭涵 <redacted>
Tested-by: Marcin FM <redacted>
Tested-by: Cristian-Florin Radoi <redacted>
Tested-by: George Salukvadze <redacted>
Tested-by: Evgeny Kapusta <redacted>
Tested-by: Samu Toljamo <redacted>
Tested-by: Ariel Rosenfeld <redacted>
Tested-by: Chapuis Dario <redacted>
Tested-by: Thibaut François <redacted>
Signed-off-by: Javier Tia <redacted>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index cf0fdea45cf7..dd5ecb07947b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c

@@ -2331,6 +2331,10 @@ void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
 	case NL80211_CHAN_WIDTH_160:
 		req->bw = CMD_CBW_160MHZ;
 		break;
+	case NL80211_CHAN_WIDTH_320:
+		req->bw = CMD_CBW_320MHZ;
+		req->center_chan2 = ieee80211_frequency_to_channel(freq2);
+		break;
 	case NL80211_CHAN_WIDTH_5:
 		req->bw = CMD_CBW_5MHZ;
 		break;

-- 
2.53.0