[PATCH 3/8] arm: dts: imx6sx-sdb: Move power supply property to Root Port node

From: Sherry Sun <hidden>
Date: 2026-03-25 11:01:32
Also in: imx, linux-devicetree, linux-pci, lkml
Subsystem: arm/freescale imx / mxc arm architecture, the rest · Maintainers: Frank Li, Sascha Hauer, Linus Torvalds

Move the vpcie-supply property from the PCIe controller node to the Root
Port child node to support the new PCI pwrctrl framework.

Signed-off-by: Sherry Sun <redacted>
---
 arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 338de4d144b2..7633ba2139d3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi

@@ -284,12 +284,12 @@ &pcie {
 	pinctrl-0 = <&pinctrl_pcie>;
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
 	status = "okay";
 };
 
 &pcie_port0 {
 	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
 };
 
 &lcdif1 {

-- 
2.37.1

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help