Re: [PATCH v10 3/3] arm64: dts: cix: add support for cix sky1 resets
From: Peter Chen <peter.chen@cixtech.com>
Date: 2026-03-11 03:08:14
Also in:
linux-devicetree, lkml
On 26-03-02 14:44:07, Gary Yang wrote:
There are two reset conctrollers on Cix Sky1 Soc. One is located in S0 domain, and the other is located in S5 domain. Signed-off-by: Gary Yang <redacted>
Applied, thanks. Peter
quoted hunk ↗ jump to hunk
--- arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index 64b76905cbff..a28b877cced2 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi@@ -348,6 +348,12 @@ i3c1: i3c@4100000 { status = "disabled"; }; + syscon: syscon@4160000 { + compatible = "cix,sky1-system-control", "syscon"; + reg = <0x0 0x4160000 0x0 0x100>; + #reset-cells = <1>; + }; + iomuxc: pinctrl@4170000 { compatible = "cix,sky1-pinctrl"; reg = <0x0 0x04170000 0x0 0x1000>;@@ -568,6 +574,12 @@ ppi_partition1: interrupt-partition-1 { }; }; + s5_syscon: syscon@16000000 { + compatible = "cix,sky1-s5-system-control", "syscon"; + reg = <0x0 0x16000000 0x0 0x1000>; + #reset-cells = <1>; + }; + iomuxc_s5: pinctrl@16007000 { compatible = "cix,sky1-pinctrl-s5"; reg = <0x0 0x16007000 0x0 0x1000>;-- 2.49.0
-- Best regards, Peter