Hi Heiko,

On 3/4/26 1:14 PM, Heiko Stuebner wrote:

From: Heiko Stuebner <redacted>

dclk_vop2_src currently has the CLK_SET_RATE_PARENT flag set, which is
very different from dclk_vop0_src or dclk_vop1_src, which don't have it.

With this flag in dclk_vop2_src, actually setting the clock then results
in a lot of other peripherals breaking, because setting the rate results
in the PLL source getting changed:

[   14.898718] clk_core_set_rate_nolock: setting rate for dclk_vop2 to 152840000
[   15.155017] clk_change_rate: setting rate for pll_gpll to 1680000000
[ clk adjusting every gpll user ]

This includes possibly the other vops, i2s, spdif and even the uarts.
Among other possible things, this breaks the uart console on a board
I use. Sometimes it recovers later on, but there will be a big block
of garbled output for a while at least.

Shared PLLs should not be changed by individual users, so drop this flag
from dclk_vop2_src.

Fixes: f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Cc: stable@vger.kernel.org
Tested-by: Quentin Schulz <redacted> # RK3588 Tiger w/ DP

Reviewed-by: Quentin Schulz <redacted>

Thanks!
Quentin