On Mon, Mar 09, 2026 at 04:44:28PM +0800, Richard Zhu wrote:

Fix dtbs_check build warnings by updating the maxItems property for
clocks in fsl,imx6q-pcie-common.yaml and completing the clock
descriptions in fsl,imx6q-pcie.yaml.

The warnings occur because the clock arrays exceed the previously
defined maximum length:

imx943-evk.dtb: pcie@4c380000 (fsl,imx95-pcie): clock-names: ['pcie', 'pcie_bus', 'pcie_phy', 'pcie_aux', 'ref', 'extref'] is too long
imx943-evk.dtb: pcie@4c300000 (fsl,imx95-pcie): clocks: [[5, 74], [5, 41], [5, 40], [5, 75], [46, 0], [47]] is too long

Fixes: 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")

This was three months ago. Can you finally start testing DTS the moment
you send bindings patches?

It is not a one time issue - I see multiple buggy patches posted by NXP
which are never validated with DTS and then months later turns out
bindings were wrong.

Many of them are posted and immediately trigger build errors reported by
LKP.

Are you going to finally test patches BEFORE you post them?

Reviewed-by: Krzysztof Kozlowski <redacted>

Best regards,
Krzysztof