On Mon, 02 Mar 2026 09:45:48 +0100, Nora Schiffer wrote:

UART1 operates in DCE mode, but the RTS/CTS pins were incorrectly
configured using the DTE pinmux setting.

Correct the pinmux to match DCE mode. Switching the RTS and CTS signals
is fine for this board, as UART1 is routed to a pin header. Existing
functionality is unaffected, as RTS/CTS could never have worked with
the incorrect pinmux.

[...]

Applied, thanks!

[1/1] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing
      commit: 3faad5f8819ac1485a14a028177ecacb1c0f3591

Best regards,
-- 
Frank Li [off-list ref]