Re: [PATCH V2 0/2] arm64: dts: imx8mp-evk: Add usdhc1 for SDIO WiFi support

On Thu, 05 Feb 2026 15:34:52 +0800, Sherry Sun wrote:

This patch set adds usdhc1 support to enable M.2 SDIO WiFi on the
i.MX8MP EVK. The M.2 connector on this board can operate in both PCIe
and SDIO modes, and SDIO-based WLAN modules require proper power control
through the same M.2 WLAN enable line (W_DISABLE1 on pin 56).

Patch 1 corrects the IOMUX configuration by enabling the pull-select bit
for the M.2 regulator GPIO, ensuring that the weak pull-up is actually
applied.
Patch 2 enables usdhc1 and associated pinctrl settings needed for SDIO
WiFi operation on the M.2 connector.

[...]

Applied, thanks!

[1/2] arm64: dts: imx8mp-evk: Enable pull select bit for PCIe regulator GPIO (M.2 W_DISABLE1)
      (no commit info)
[2/2] arm64: dts: imx8mp-evk: Add usdhc1 for SDIO WiFi support
      (no commit info)

Best regards,
--
Frank Li [off-list ref]