Drivers will not always call set_sysclk() for all clocks, especially when
default mclk-fs can be used.
When that is the case, use the clock rate set in the params multiplied by the
default mclk-fs.

Fixes: 5323186e2e8d ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
  sound/soc/rockchip/rockchip_i2s_tdm.c | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c
index 770b9bfbb384..fc52149ed6ae 100644
--- a/sound/soc/rockchip/rockchip_i2s_tdm.c
+++ b/sound/soc/rockchip/rockchip_i2s_tdm.c

@@ -22,6 +22,7 @@
  
  #define DRV_NAME "rockchip-i2s-tdm"
  
+#define DEFAULT_MCLK_FS				256
  #define CH_GRP_MAX				4  /* The max channel 8 / 2 */
  #define MULTIPLEX_CH_MAX			10
  

@@ -665,6 +666,15 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
  			mclk_rate = i2s_tdm->mclk_rx_freq;
  		}
  
+		/*
+		 * When the dai/component driver doesn't need to set mclk-fs for a specific
+		 * clock, it can skip the call to set_sysclk() for that clock.
+		 * In that case, simply use the clock rate from the params and multiply it by
+		 * the default mclk-fs value.
+		 */
+		if (!mclk_rate)
+			mclk_rate = DEFAULT_MCLK_FS * params_rate(params);
+
  		err = clk_set_rate(mclk, mclk_rate);
  		if (err)
  			return err;