[PATCH 1/5] ARM: dts: ti: Enable overlays for all DTB files
From: "Kory Maincent (TI)" <kory.maincent@bootlin.com>
Date: 2026-02-12 15:28:11
Also in:
dri-devel, linux-devicetree, linux-omap, lkml
Subsystem:
omap device tree support, the rest · Maintainers:
Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Allow overlays to be applied to any DTB. This adds around ~40% to the total size of the DTB files on average. Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com> -- Enable overlays for all dtb similarly to what has been done for arch64 TI boards, but we could only enable overlays for Beagle Bone and variant boards if required. --- arch/arm/boot/dts/ti/omap/Makefile | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 14e500846875e..52df04328aff2 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile@@ -175,3 +175,6 @@ dtb-$(CONFIG_SOC_TI81XX) += \ dm8148-t410.dtb \ dm8168-evm.dtb \ dra62x-j5eco-evm.dtb + +# Enable support for device-tree overlays +DTC_FLAGS := -@
--
2.43.0