Re: [PATCH v5 2/2] arm64: dts: freescale: add NXP FRDM-IMX91S board support
From: Daniel Baluta <hidden>
Date: 2026-02-10 14:20:09
Also in:
imx, linux-devicetree, lkml
On Tue, Feb 10, 2026 at 12:49 PM Yanan Yang [off-list ref] wrote:
Add DeviceTree support for the NXP FRDM-IMX91S development board based on the i.MX91 SoC. FRDM-IMX91S is a cost-optimized variant of FRDM-IMX91 and differs in memory, storage, Ethernet, and PMIC configuration: - 512MB LPDDR4 (FRDM-IMX91 uses 1GB) - 256MB FlexSPI-NAND (FRDM-IMX91 uses 8GB eMMC) - Single GbE port (FRDM-IMX91 has dual GbE) - PMIC PF9453 (FRDM-IMX91 uses PCA9451A) This DT enables: - ADC1 - UART1 and UART5 - I2C bus and children nodes - USB and related nodes - uSDHC1 and uSDHC2 - FlexSPI NAND flash - Watchdog3 - Ethernet (eqos) - FlexCAN - MQS Link: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-IMX91S (FRDM-IMX91S board page) Link: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-IMX91 (FRDM-IMX91 board page)
Tested-by: Daniel Baluta <daniel.baluta@nxp.com> Used your patches on top of linux-next 20260209 and managed to boot the board using serial downloader and rootfs via nfs.