[PATCH 6/7] arm64: dts: st: enable all RISAB instances on the stm32mp257f-dk board
From: Gatien Chevallier <gatien.chevallier@foss.st.com>
Date: 2026-02-09 15:01:03
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
To be able to dump the RISAB configurations, enable all RISAB instances on the stm32mp257f-dk board. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> --- arch/arm64/boot/dts/st/stm32mp257f-dk.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
index e718d888ce21..42894ba954cc 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts@@ -100,6 +100,30 @@ phy1_eth1: ethernet-phy@1 { }; }; +&risab1 { + status = "okay"; +}; + +&risab2 { + status = "okay"; +}; + +&risab3 { + status = "okay"; +}; + +&risab4 { + status = "okay"; +}; + +&risab5 { + status = "okay"; +}; + +&risab6 { + status = "okay"; +}; + &scmi_regu { scmi_vddio1: regulator@0 { regulator-min-microvolt = <1800000>;
--
2.43.0