On Tue, Feb 03, 2026 at 06:38:18PM +0530, Manivannan Sadhasivam wrote:

On Tue, Feb 03, 2026 at 09:56:06AM +0800, Sherry Sun wrote:

quoted

DT binding allows specifying 'reset' property in both host bridge and
Root Port nodes, but specifying in the host bridge node is marked as
deprecated. So add support for parsing the new binding that uses
'reset-gpios' property for PERST#.

The initial idea is to add the PCIe M.2 KeyE connector support and PCI
power control framework to the pcie-imx6 driver. Since the new
M.2/pwrctrl model is implemented based on Root Ports and requires the
pwrctrl driver to bind to a Root Port device, we need to introduce a
Root Port child node on i.MX boards that provide an M.2 connector.

To follow a more standardized DT structure, it also makes sense to move
the reset-gpios and wake-gpios properties into the Root Port node. These
signals logically belong to the Root Port rather than the host bridge,
and placing them there aligns with the new M.2/pwrctrl model.

To maintain DT backwards compatibility, fallback to the legacy method of
parsing the host bridge node if the reset property is not present in the
Root Port node.

Signed-off-by: Sherry Sun <redacted>
---
 drivers/pci/controller/dwc/pci-imx6.c | 123 +++++++++++++++++++++++---
 1 file changed, 109 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index a5b8d0b71677..e3ba68976bee 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c

@@ -148,10 +148,15 @@ struct imx_lut_data {
 	u32 data2;
 };

+struct imx_pcie_port {
+	struct list_head	list;
+	struct gpio_desc	*reset;
+};
+

I'd love to abstract the Root Port properties in a generic struct so that we can
introduce generic APIs to parse the ports. But I'm not asking you to implement
it :)

good idea, where is good place to put it?

quoted

@@ -1688,12 +1771,24 @@ static int imx_pcie_probe(struct platform_device *pdev)
 			return PTR_ERR(imx_pcie->phy_base);
 	}

-	/* Fetch GPIOs */
-	imx_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(imx_pcie->reset_gpiod))
-		return dev_err_probe(dev, PTR_ERR(imx_pcie->reset_gpiod),
-				     "unable to get reset gpio\n");
-	gpiod_set_consumer_name(imx_pcie->reset_gpiod, "PCIe reset");
+	ret = imx_pcie_parse_ports(imx_pcie);
+	if (ret) {
+		if (ret != -ENOENT)
+			return dev_err_probe(dev, ret, "Failed to parse Root Port: %d\n", ret);
+
+		/*
+		 * In the case of properties not populated in Root Port node,
+		 * fallback to the legacy method of parsing the Host Bridge
+		 * node. This is to maintain DT backwards compatibility.
+		 */
+		ret = imx_pcie_parse_legacy_binding(imx_pcie);
+		if (ret)
+			return dev_err_probe(dev, ret, "Unable to get reset gpio: %d\n", ret);
+	}
+
+	ret = devm_add_action_or_reset(dev, imx_pcie_delete_ports, imx_pcie);
+	if (ret)
+		return ret;

I'd prefer to do it in err labels.

we just removed err label and module remove.

Frank

- Mani

--
மணிவண்ணன் சதாசிவம்