[PATCH 1/6] arm64: dts: ti: k3-am68-phyboard-izar: Assign dss clocks
From: Dominik Haller <hidden>
Date: 2026-01-30 20:59:24
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Assign the dss clocks in the base dts so that display overlays can be used in any combination. Signed-off-by: Dominik Haller <redacted> --- .../boot/dts/ti/k3-am68-phyboard-izar.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
index e221ccb30e95..b8d17bdb7685 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts@@ -298,6 +298,24 @@ phy0: ethernet-phy@0 { }; }; +&dss { + /* + * VP0 - Displayport + * VP1 - DPI0 + * VP2 - DSI0 + * VP3 - DPI1/DSI1 + */ + + assigned-clocks = <&k3_clks 158 2>, + <&k3_clks 158 5>, + <&k3_clks 158 14>, + <&k3_clks 158 18>; + assigned-clock-parents = <&k3_clks 158 3>, + <&k3_clks 158 7>, + <&k3_clks 158 16>, + <&k3_clks 158 22>; +}; + &i2c_som_rtc { trickle-resistor-ohms = <3000>; };
--
2.43.0