From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

The xiic driver is designed to operate without explicit clock configuration
when clocks are not specified in the firmware. This functionality is
already implemented in xiic_setclk(), which performs an early return when
either i2c_clk or input_clk are zero:

This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
returns zero, allowing the driver to rely on hardware-configured timing.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 12321654055f..2da7e9d1d5ca 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c

@@ -1465,7 +1465,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	mutex_init(&i2c->lock);
 	spin_lock_init(&i2c->atomic_lock);
 
-	i2c->clk = devm_clk_get_enabled(dev, NULL);
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return dev_err_probe(dev, PTR_ERR(i2c->clk),
 				     "failed to enable input clock.\n");

-- 
2.52.0