On Wed, 21 Jan 2026 11:42:13 +0400, Alexey Charkov wrote:

Rockchip RK3576 UFS controller uses a dedicated pin to reset the connected
UFS device, which can operate either in a hardware controlled mode or as a
GPIO pin.

Power-on default is GPIO mode, but the boot ROM reconfigures it to a
hardware controlled mode if it uses UFS to load the next boot stage.

[...]

Applied, thanks!

[1/1] arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
      commit: 79a3286e61829fc43abdd6e3beb31b24930c7af6

Best regards,
-- 
Heiko Stuebner [off-list ref]