[PATCH v5 4/5] arm64: dts: qcom: talos: Add camera MCLK pinctrl
From: Wenmeng Liu <hidden>
Date: 2026-01-22 10:50:12
Also in:
imx, linux-arm-msm, linux-devicetree, linux-i2c, linux-media, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Define pinctrl definitions to enable camera master clocks on Talos. Reviewed-by: Konrad Dybcio <redacted> Reviewed-by: Dmitry Baryshkov <redacted> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Wenmeng Liu <redacted> --- arch/arm64/boot/dts/qcom/talos.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 6d28096e50546855bd762e479b66ed6214ec5d65..33897994d0ca8a193acfbc94a932551a09c712ce 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi@@ -1553,6 +1553,34 @@ tlmm: pinctrl@3100000 { #interrupt-cells = <2>; wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + pins = "gpio28"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam1_default: cam1-default-state { + pins = "gpio29"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam2_default: cam2-default-state { + pins = "gpio30"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam3_default: cam3-default-state { + pins = "gpio31"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + cci_i2c0_default: cci-i2c0-default-state { /* SDA, SCL */ pins = "gpio32", "gpio33";
--
2.34.1