[PATCH v8 05/10] pinctrl: s32cc: change to "devm_pinctrl_register_and_init"
From: Khristine Andreea Barbulescu <hidden>
Date: 2026-01-20 11:59:43
Also in:
imx, linux-devicetree, linux-gpio, lkml
Subsystem:
arm/nxp s32g architecture, pin control subsystem, pin controller - freescale, the rest · Maintainers:
Linus Walleij, Dong Aisheng, Fabio Estevam, Frank Li, Jacky Bai, Linus Torvalds
From: Andrei Stefanescu <redacted> Switch from "devm_pinctrl_register" to "devm_pinctrl_register_and_init" and "pinctrl_enable" since this is the recommended way. Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Linus Walleij <redacted> Signed-off-by: Andrei Stefanescu <redacted> --- drivers/pinctrl/nxp/pinctrl-s32cc.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c
index a98f8e7c2768..4767916dbcab 100644
--- a/drivers/pinctrl/nxp/pinctrl-s32cc.c
+++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c@@ -974,10 +974,10 @@ int s32_pinctrl_probe(struct platform_device *pdev, return dev_err_probe(&pdev->dev, ret, "Fail to probe dt properties\n"); - ipctl->pctl = devm_pinctrl_register(&pdev->dev, s32_pinctrl_desc, - ipctl); - if (IS_ERR(ipctl->pctl)) - return dev_err_probe(&pdev->dev, PTR_ERR(ipctl->pctl), + ret = devm_pinctrl_register_and_init(&pdev->dev, s32_pinctrl_desc, + ipctl, &ipctl->pctl); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Could not register s32 pinctrl driver\n"); #ifdef CONFIG_PM_SLEEP
@@ -990,7 +990,12 @@ int s32_pinctrl_probe(struct platform_device *pdev, return -ENOMEM; #endif - dev_info(&pdev->dev, "initialized s32 pinctrl driver\n"); + ret = pinctrl_enable(ipctl->pctl); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to enable pinctrl\n"); + + dev_info(&pdev->dev, "Initialized S32 pinctrl driver\n"); return 0; }
--
2.50.1