On Wed, 14 Jan 2026 23:48:35 +0100, Ricardo Pardini wrote:

This series adds a few things missing from the Radxa Zero 2:

1) NPU (etnaviv), just enable the node, similar to what was done for VIM3
2) i2c3 (also exposed on the 40-pin header) and the FUSB302 at 0x22

Signed-off-by: Ricardo Pardini <redacted>
---
Ricardo Pardini (2):
      arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
      arm64: dts: amlogic: add the type-c controller on Radxa Zero 2

 .../boot/dts/amlogic/meson-g12b-radxa-zero2.dts    | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
---
base-commit: 0f61b1860cc3f52aef9036d7235ed1f017632193
change-id: 20260114-arm64-dts-amlogic-radxa-zero2-additions-905549fbed3e

Best regards,
--
Ricardo Pardini [off-list ref]

My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: 0f61b1860cc3f52aef9036d7235ed1f017632193 (use --merge-base to override)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/amlogic/' for 20260114-arm64-dts-amlogic-radxa-zero2-additions-v1-0-8b5cdf328fde@pardini.net:

arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dtb: fusb302@22 (fcs,fusb302): 'connector' is a required property
	from schema $id: http://devicetree.org/schemas/usb/fcs,fusb302.yaml