Patch 1: add compatible strings for OrangePi 6 Plus board
Patch 2: add dts file for OrangePi 6 Plus board

OrangePi 6 Plus board is powered by Cix Sky1. You could find brief
introduction for SoC and related boards at:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-6-Plus.html

Currently, to run upstream kernel at OrangePi 6 Plus board, you need to
use BIOS released by OrangePi, and add "clk_ignore_unused=1" at bootargs.
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-6-Plus.html

v4 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml
scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board

v3 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml
scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board
- Fix the commit message length within 75 words

v2 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml
scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board

Gary Yang (2):
  dt-bindings: arm: cix: add OrangePi 6 Plus board
  arm64: dts: cix: Add OrangePi 6 Plus board support

 .../devicetree/bindings/arm/cix.yaml          |  6 +-
 arch/arm64/boot/dts/cix/Makefile              |  1 +
 arch/arm64/boot/dts/cix/sky1-xcp.dts          | 83 +++++++++++++++++++
 3 files changed, 88 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/cix/sky1-xcp.dts

-- 
2.49.0