[PATCH 2/6] arm64: dts: imx8mq-librem5: Set vibrator's PWM frequency to 20kHz
From: Sebastian Krzyszkowiak via B4 Relay <devnull+sebastian.krzyszkowiak.puri.sm@kernel.org>
Date: 2026-01-05 20:40:03
Also in:
b4-sent, imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> 1Hz as used previously was way too long. Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index ce039bd701c2..b92b5f7b2bd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi@@ -287,7 +287,7 @@ bm818_codec: sound-wwan-codec { vibrator { compatible = "pwm-vibrator"; - pwms = <&pwm1 0 1000000000 0>; + pwms = <&pwm1 0 50000 0>; pwm-names = "enable"; vcc-supply = <®_vdd_3v3>; };
--
2.52.0