Re: tps65219/am62p kernel oops
From: Shree Ramamoorthy <hidden>
Date: 2025-12-09 18:16:13
Also in:
linux-omap, lkml
Hi Francesco, On 12/9/25 7:43 AM, Francesco Dolcini wrote:
Hello Shree, On Thu, May 01, 2025 at 10:32:12AM -0500, Shree Ramamoorthy wrote:quoted
On 4/30/25 5:21 AM, Francesco Dolcini wrote:quoted
On Wed, Apr 30, 2025 at 10:01:14AM +0200, Francesco Dolcini wrote:quoted
On Tue, Apr 29, 2025 at 06:52:40PM +0200, Andreas Kemnade wrote:quoted
Am Tue, 29 Apr 2025 15:21:19 +0200 schrieb Francesco Dolcini [off-list ref]:quoted
Hello all, while working on adding support in mainline for a new board based on TI AM62P SoC I noticed the following Kernel Oops. This oops was reproduced running current Linux master, 6.15.0-rc4+, ca91b9500108d4cf083a635c2e11c884d5dd20ea, but I was able to reproduce the same with 6.14.4.[...]quoted
[ +0.000022] Call trace: [ +0.000011] regulator_notifier_call_chain+0x20/0xa4 (P) [ +0.000018] tps65219_regulator_irq_handler+0x34/0x80wild guessing: maybe because irqdata->rdev is not initalized in _probe()? At least I do not see where it would be initialized.your wild guess seems correct, I'll send a proper patch with your suggested-by after doing a couple of more tests, thanks.so, the bug is clear, however the fix is not an obvious one liner as I was wishing. we would need to add a link from each of the interrupts to the specific regulator. as of now such a connection is not existing in the code.I'll try out implementing and testing the solution, but will get to it early next week. Will email with any updates!What's the status on this? Were you able to do any progress or work on it? Thanks Francesco
Thanks for following up on this, the task got lost on my end. My apologies! The original line deleted `irq_data[i].rdev = rdev;` was never replaced. The correct code should be re-implementing a version of the tps65219_get_rdev_by_name() function that was removed in commit 64a6b57 & add in irq_data.rdev = rdev;` where the other irq_data fields are being assigned within _probe. Is there anything missing with this solution? Thanks!
-- Best, Shree Ramamoorthy PMIC Software Engineer