Re: [PATCH 4/4] dmaengine: stm32-dma3: introduce ddata2dev helper
From: Eugen Hristev <hidden>
Date: 2025-11-21 09:25:57
Also in:
dmaengine, lkml
On 11/3/25 12:15, Amelie Delaunay wrote:
quoted hunk ↗ jump to hunk
ddata2dev helper returns the device pointer from struct dma_device stored in stm32_dma3_ddata structure. Device pointer from struct dma_device has been initialized with &pdev->dev, so the ddata2dev helper returns &pdev->dev. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- drivers/dma/stm32/stm32-dma3.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-)diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c index 29ea510fa539..9f49ef8e2972 100644 --- a/drivers/dma/stm32/stm32-dma3.c +++ b/drivers/dma/stm32/stm32-dma3.c@@ -333,6 +333,11 @@ static struct device *chan2dev(struct stm32_dma3_chan *chan) return &chan->vchan.chan.dev->device; } +static struct device *ddata2dev(struct stm32_dma3_ddata *ddata) +{ + return ddata->dma_dev.dev; +}
Not really sure how much this helper actually simplifies the code. To me it appears as if there is no improvement, but this is a personal preference.> +
quoted hunk ↗ jump to hunk
static void stm32_dma3_chan_dump_reg(struct stm32_dma3_chan *chan) { struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);@@ -392,6 +397,7 @@ static void stm32_dma3_chan_dump_hwdesc(struct stm32_dma3_chan *chan, } else { dev_dbg(chan2dev(chan), "X\n"); } +
This newline here appears to be unintended > }
quoted hunk ↗ jump to hunk
static struct stm32_dma3_swdesc *stm32_dma3_chan_desc_alloc(struct stm32_dma3_chan *chan, u32 count)@@ -1110,7 +1116,7 @@ static int stm32_dma3_alloc_chan_resources(struct dma_chan *c) struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan); int ret; - ret = pm_runtime_resume_and_get(ddata->dma_dev.dev); + ret = pm_runtime_resume_and_get(ddata2dev(ddata)); if (ret < 0) return ret;@@ -1144,7 +1150,7 @@ static int stm32_dma3_alloc_chan_resources(struct dma_chan *c) chan->lli_pool = NULL; err_put_sync: - pm_runtime_put_sync(ddata->dma_dev.dev); + pm_runtime_put_sync(ddata2dev(ddata)); return ret; }@@ -1170,7 +1176,7 @@ static void stm32_dma3_free_chan_resources(struct dma_chan *c) if (chan->semaphore_mode) stm32_dma3_put_chan_sem(chan); - pm_runtime_put_sync(ddata->dma_dev.dev); + pm_runtime_put_sync(ddata2dev(ddata)); /* Reset configuration */ memset(&chan->dt_config, 0, sizeof(chan->dt_config));@@ -1610,11 +1616,11 @@ static bool stm32_dma3_filter_fn(struct dma_chan *c, void *fn_param) if (!(mask & BIT(chan->id))) return false; - ret = pm_runtime_resume_and_get(ddata->dma_dev.dev); + ret = pm_runtime_resume_and_get(ddata2dev(ddata)); if (ret < 0) return false; semcr = readl_relaxed(ddata->base + STM32_DMA3_CSEMCR(chan->id)); - pm_runtime_put_sync(ddata->dma_dev.dev); + pm_runtime_put_sync(ddata2dev(ddata)); /* Check if chan is free */ if (semcr & CSEMCR_SEM_MUTEX)@@ -1636,7 +1642,7 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st struct dma_chan *c; if (dma_spec->args_count < 3) { - dev_err(ddata->dma_dev.dev, "Invalid args count\n"); + dev_err(ddata2dev(ddata), "Invalid args count\n"); return NULL; }@@ -1645,14 +1651,14 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st conf.tr_conf = dma_spec->args[2]; if (conf.req_line >= ddata->dma_requests) { - dev_err(ddata->dma_dev.dev, "Invalid request line\n"); + dev_err(ddata2dev(ddata), "Invalid request line\n"); return NULL; } /* Request dma channel among the generic dma controller list */ c = dma_request_channel(mask, stm32_dma3_filter_fn, &conf); if (!c) { - dev_err(ddata->dma_dev.dev, "No suitable channel found\n"); + dev_err(ddata2dev(ddata), "No suitable channel found\n"); return NULL; }@@ -1665,6 +1671,7 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata) { + struct device *dev = ddata2dev(ddata); u32 chan_reserved, mask = 0, i, ccidcfgr, invalid_cid = 0; /* Reserve Secure channels */@@ -1676,7 +1683,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata) * In case CID filtering is not configured, dma-channel-mask property can be used to * specify available DMA channels to the kernel. */ - of_property_read_u32(ddata->dma_dev.dev->of_node, "dma-channel-mask", &mask); + of_property_read_u32(dev->of_node, "dma-channel-mask", &mask); /* Reserve !CID-filtered not in dma-channel-mask, static CID != CID1, CID1 not allowed */ for (i = 0; i < ddata->dma_channels; i++) {@@ -1696,7 +1703,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata) ddata->chans[i].semaphore_mode = true; } } - dev_dbg(ddata->dma_dev.dev, "chan%d: %s mode, %s\n", i, + dev_dbg(dev, "chan%d: %s mode, %s\n", i, !(ccidcfgr & CCIDCFGR_CFEN) ? "!CID-filtered" : ddata->chans[i].semaphore_mode ? "Semaphore" : "Static CID", (chan_reserved & BIT(i)) ? "denied" :@@ -1704,7 +1711,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata) } if (invalid_cid) - dev_warn(ddata->dma_dev.dev, "chan%*pbl have invalid CID configuration\n", + dev_warn(dev, "chan%*pbl have invalid CID configuration\n", ddata->dma_channels, &invalid_cid); return chan_reserved;