On Thu, 13 Nov 2025 09:14:03 +0100, Maxime Chevallier wrote:

The ability to describe the physical ports of Ethernet devices is useful
to describe multi-port devices, as well as to remove any ambiguity with
regard to the nature of the port.

Moreover, describing ports allows for a better description of features
that are tied to connectors, such as PoE through the PSE-PD devices.

Introduce a binding to allow describing the ports, for now with 2
attributes :

 - The number of pairs, which is a quite generic property that allows
   differentating between multiple similar technologies such as BaseT1
   and "regular" BaseT (which usually means BaseT4).

 - The media that can be used on that port, such as BaseT for Twisted
   Copper, BaseC for coax copper, BaseS/L for Fiber, BaseK for backplane
   ethernet, etc. This allows defining the nature of the port, and
   therefore avoids the need for vendor-specific properties such as
   "micrel,fiber-mode" or "ti,fiber-mode".

The port description lives in its own file, as it is intended in the
future to allow describing the ports for phy-less devices.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 .../bindings/net/ethernet-connector.yaml      | 57 +++++++++++++++++++
 .../devicetree/bindings/net/ethernet-phy.yaml | 18 ++++++
 MAINTAINERS                                   |  1 +
 3 files changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-connector.yaml

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>